Crushing Production Line: Impact Crusher or Cone Crusher?

It is widely known that in aggregate production lines, the jaw crusher unquestionably handles primary crushing. However, for secondary and tertiary crushing, should one choose an impact crusher or a cone crusher? Selecting the appropriate equipment not only reduces costs but also produces higher-quality products. This guide comprehensively analyzes both options based on their working principles, suitable materials, and applications.

Similarities Between Impact Crushers and Cone Crushers

• During the crushing stage, both impact crushers and cone crushers are commonly employed for secondary or tertiary crushing after primary jaw crushing. Both utilize mechanical force to reduce coarse ore into smaller particles suitable for subsequent processing.
• In terms of application scenarios, both impact crushers and cone crushers are widely used in mining, building materials, metallurgy, chemical, and other industries.
• Regarding ore hardness, there is also overlap between the two, as both can crush medium-hardness ores.

Differences Between Impact Crushers and Cone Crushers

1.Different Crushing Principles

• Impact crushers operate on the principle of impact crushing, primarily relying on “impact.” A high-speed rotating rotor drives impact plates to violently strike the material, causing it to break.
• Cone crushers operate on the principle of layer crushing, primarily relying on “compression and grinding.” Material is subjected to continuous compression, bending, and grinding between the fixed cone and the moving cone, causing it to break.

2.Different Applicable Material Properties

• Impact crushers suit medium-to-low hardness, relatively brittle materials like limestone, dolomite, coal gangue, and construction waste. High-hardness materials cause severe wear.
• Cone crushers handle medium-to-high hardness, highly abrasive materials such as granite, basalt, diabase, and river pebbles. Excessively soft or sticky materials may cause blockages in cone crushers.

Impact crushers rely on “striking” and suit medium-to-low hardness ores; cone crushers rely on “compression” and specialize in medium-to-high hardness materials. While cone crushers can process ores handled by impact crushers, this increases investment costs. Therefore, in secondary crushing stages, select the most cost-effective crushing equipment based on ore characteristics.

Should you choose an impact crusher or a cone crusher for medium-fine crushed stone?

1. If your raw material is medium-to-low hardness rock like limestone, and you require high-quality finished particle shape (e.g., for high-strength concrete), or if your investment budget is limited, prioritize an impact crusher.
2. If your feed material is high-hardness, highly abrasive rock like granite or basalt, and you prioritize long-term stable production line operation and low wear part consumption, a cone crusher is essential—even with higher initial investment.

In large-scale aggregate production lines, combinations like “jaw crusher + cone crusher + impact crusher” or “jaw crusher + cone crusher + vertical shaft impact crusher” are commonly employed. Such configurations significantly enhance both particle shape and overall efficiency.

Conclusion

In summary, while both impact crushers and cone crushers serve as primary equipment for medium and fine crushing, their underlying principles are fundamentally different. The choice between them isn’t simply a matter of superiority but requires comprehensive consideration of your raw material characteristics, product specifications, and profitability goals.